PILOT'S CHECKLIST

We strongly recommend you to check the following agenda for your own safety before starting!

• Check the tight fit of the 6 propeller screws, if necessary retighten them
• Check firm seating of spinner
• Check propeller for possible damage
• Throttle position in idle
• Check all batteries
• Check servo functions
• Ignition-Switch: OFF
• Check pressure (6-8 bar) system of retract / if applicable
• Check all interlinkage for play
• When starting the engine 1 person (minimum) must hold the model
• Check wheels for possible damange and easy running
• Check wing mounting for tight fit and for safe and proper interlocking
• Check canopy for tight fit and safe interlocking

Installation of Engine and Ignition

• Minimum distance 100mm between ignition and receiver battery
• Protect ignition cable only with spiral plastic band
• Never remove sparkplug connector with mechanical aids
• Remove sparkplug connector by twist/pull movement
• Sparking-connector has to have a firm and save sit on sparkplug hexagon.
• If this is not the case; radio interference
• Use only ignition on/off switches recommended by 3W
• Battery operating not below 4,8V
• Use high quality servo for throttle operation of carburettor
• tank set-up for engines with 1 tors:
• tank set-up for engines with 2 tors:
• Never fill tank through fuel line
• Use same inside diameter for tank ventilation and carburettor fuel line