Suitable for 3D-flying of our XTRA and VOTEC – FUNS or other Funflyer with a maximum take off weight of 6,0 kg. Using a optimum propeller a static thrust of 8,0 kg can be achived. This engine can be used for a wide range of models. The high power output makes it comparable with higher capacity engines.

The micro processor controlled igniton allows to easy start the engine. The programmed timing curve is laid out for the engines and guarantees a good running characteristic in all RPM – ranges. An out put signal to monitor RPM is standard as well as a LED showing the status of the ignition. The voltage range of the standard ignition : 6V – 8,4V ( 2 cell LIPO battery ).

€ 763,19

Techn. specifications

Cylinder capacity 1.74 cu in
Power 3.35 HP
Power Rating 2,5 KW
Bore Diameter 1.42 inch
Stroke 1.12 inch
Speed range 1500 - 8500 rpm
Weight 2.67 lbs, incl. Ignition
Crankshaft 3 ball bearings
Oil / Gasoline Ratio 1 : 50 / 2% Mix
IIS - Ignition 6 - 8,4 V
Propeller 2-bladed 16x10;18x8;18x10;20x8
Propeller 3-bladed 16x8;16x10


  • Engine
  • Ignition
  • Spark Plugs
  • Prop washer
  • Prop screws
  • Carburetor arm
  • Engine manual
  • Exhaust Gaskets
  • Intake Manifold
Article no. 10000200
Unit: pcs

Recommended accessories