3W-210Xi B2 F TS
The robustness of the 3W-210xiB2 leaves nothing to be desired. The generously dimensioned ball bearings and needle bearings and the strong crankshaft ensure a long life time of the engine. This makes it interesting for industrial use.
With a suitable 3W-muffler system and propeller a static thrust of 42kg can be achived. The engine can be used for a wide range of models. Its characteristics are : power , reliability and a long life.
TS –Version ( Twin Spark , 2 spark plugs per cylinder ) convinces with a low idle and softer running characteristic. All boxer engines with this set up have a better reliability. In case 1 ignition will fail the 2nd. ignition - which operates autonomously – allows the engine to run further with reduced RPM ( 200 – 300).
The micro processor controlled igniton allows to easy start the engine. The programmed timing curve is laid out for the engines and guarantees a good running characteristic in all RPM – ranges. An out put signal to monitor RPM is standard as well as a LED showing the status of the ignition. The voltage range of the standard ignition : 6V – 8,4V ( 2 cell LIPO battery ).
Techn. specifications
| Cylinder capacity | 12.80 cu in |
| Power | 17.73 HP |
| Power Rating | 13.23 KW |
| Bore Diameter | 2.16 inch |
| Stroke | 1.73 inch |
| Speed range | 1000 - 7500 rpm |
| Weight | 11.01 lbs, incl. Ignition |
| Crankshaft | 3 ball bearings |
| Oil / Gasoline Ratio | 1 : 50 / 2% Mix |
| IIS - Ignition | 6 - 8,4 V |
| Propeller 2-bladed | 34 x 12; 34 x 14; 36 x 10 |
| Propeller 3-bladed | 32 x 10; 30x12 |
Shipment
- Engine
- Ignition
- Twin Spark Filter
- Spark Plugs
- Prop washer
- Prop screws
- Carburetor arm
- Engine manual
- Exhaust Gaskets
- Intake Manifold
| Article no. | 10002300 |
| Unit: | pcs |












